How Can I Get More Horsepower Out Of My 350?

How much HP can you get out of a 350?

a typical 350 Chevy can make upwards of 350 – 375 HP before you exceed the reliability of the components.

For a big block with the same stock components it can make in the area of about 400 to 475 or so HP and handle upwards of about 500 HP before you exceed the reliability of the stock cast pistons..

How much HP can a 4 bolt main 350 handle?

1. 4-bolt blocks with OEM main bolts are good to 475 HP, and are good to 7200 RPM. 2.

How much horsepower does a tune add?

With a performance tune the A/F ratio is usually around 13.2:1 to 12.5:1 which is richer but provides the best performance gains.

How much horsepower do headers add to a 350?

Adding headers simply brings that part of the system up to par with the rest of the parts. Chevy High Performance Magazine installed a set of Hooker headers onto a stock engine and saw an immediate increase of 16 horsepower and a more dramatic increase of 53 foot-pounds of torque.

How much horsepower can a 2 bolt main 350 handle?

Stay away from the 2-piece rear main! A 2-bolt main with aftermarket studs is stronger than a 4-bolt main block, less prone to crack, and can take up to 600 HP on a seasoned block.

How much horsepower can a cold air intake add?

It makes such a big difference, in fact, that the simple process of redirecting the filter to draw cooler air is good for a horsepower gain of about 5 to 20 ponies in most cars. It might even improve your fuel efficiency, and it’ll probably make your engine sound better, too.

Can you put 400 heads on a 350?

400 heads on a 350 block is a great way to increase your midrange and top end power. The swap is a direct bolt – on deal, you just need to be sure to use 400 head gaskets when you do the swap.

Is a 400 small block better than a 350?

A small block 350 and a 400 have an identical block design. Most accessories will fit either engine. The major difference is found in the casting numbers and the way they are balanced. Most 350 cubic inch engines are internally balanced whereas the 400 engines are not.

How much horsepower can Headers add?

If you search “how much HP do headers add?” you’ll get an array of answers, but we feel comfortable telling you to expect an increase of horsepower somewhere between 10 and 30.

Can you get 500hp out of a 350?

You “can” get 500HP out of a 350 BUT because it is a small cubic inch engine it IS going to be peaky and won’t have much torque. … You do NOT want a “chain saw” of an engine in your car! Chain saws make NO torque and they only way they can cut wood is at wide open throttle at their peak RPM.

What year is the best Chevy 350 engine?

L31 (2002) From a purely technical standpoint, the most recent version of the Chevy 350 would naturally be the best of the bunch. Marketed as the “Vortec 5700” engine, but known internally by the moniker of L31, this engine was used primarily in GM vans and trucks until 2002.

How much does it cost to increase horsepower?

Horsepower gain varies depending on the brand of the intake and the engine it is bolted to. Typical gains are in the range of 5 to 20 horsepower. Cold air intake systems generally cost around $100 to $400 and there are a number of reputable manufacturers, including AEM and Injen, who carry a variety of models.

How much HP do shorty headers add?

The headers will give you 8 to 15 additional HP gains, and come packaged with gaskets and the hardware needed for installation. Performance-tuned and engine-matched with performance gains at the lower to midrange RPM highway speeds.

How much horsepower do high flow cats add?

The amount of horsepower you will get from a high flow catalytic converter depends on your engine and the modifications you have made to it. You may see a horsepower gain of as little as 5 hp or as much as 60 hp. You may also get an extra 5-60 ft lbs of torque.