Quick Answer: How Do I Access BMW Hidden Menu?

How do I reset my BMW computer?

Follow the steps below to reset a BMW computer.Turn your ignition key to the accessory position when the lights and radio come on (before starting the car).Press and hold the “Trip” button on the instrument panel until the red light comes on.Press the “Trip” button a second time and hold until “Reset” appears..

Should DTC be on or off?

You use the default (no lights / no button push / full traction control) when you’re driving, especially if it’s slippery. The computer is on and trying to keep you going where you want. You use DTC (one button push) when you want to allow some wheel spin without having the traction control system pull the power off.

What is a DTC code?

DTC (diagnostic trouble codes), also known as OBDII codes, are your car’s system for alerting you of vehicle issues. There are typically limits for each system within your vehicle.

What does DTC do on a BMW?

Dynamic Traction Control (DTC) is a sub-function of the Dynamic Stability Control (DSC) system that can be turned on and off. DTC has two major uses: to regulate traction and to enable sports-style driving while providing active stability control.

What is drivetrain malfunction BMW x3?

What does drivetrain malfunction mean? BMW Drivetrain Malfunction error message means that the engine control module (also known as DDE ECU ECM or DME) has detected an engine or transmission issue. The maximum torque output is limited by the ECU to prevent damage.

What causes a BMW not to start?

The most common reason for a BMW to crank but not start is either bad fuel pump, or bad fuel pump fuse, or bad fuel pump relay. … Also, you have fuse for the ignition coils and the ECU engine computer, if this fuse is bad your BMW will crank but it will not start.

How do I check my BMW iDrive service history?

Where to find the iDrive Service History information ? To access the iDrive Service History menu you need to go to the Service Requirements page. You should then see the Service History right there, at the top of the list.

Will disconnecting my car battery reset the computer?

Will Disconnecting a Car Battery Reset The Computer? The answer is, maybe. Disconnecting the battery for a short time may not do the trick because the car’s computer, or ECU, still has some current in it. Waiting for over 15 minutes after disconnecting the engine will help ensure the equipment is reset.

How do you clear the code on a BMW?

BannedDisconnect the battery terminals’ leads, and connect the leads together directly or with some wire, and leave for 10 minutes.After the above, reconnect battery, turn key to #2 position, and hold accelerator pedal down on to the floor for 60 seconds.Start the car. All error codes cleared.

What does BMW e93 mean?

The fifth generation of the BMW 3 Series consists of the BMW E90 (sedan), BMW E91 (wagon, marketed as ‘Touring’), BMW E92 (coupe) and BMW E93 (convertible) compact executive cars. The E90/E91/E92/E93 was produced from 2004 to 2013 and is often collectively referred to as the E90 or E9x.

Can I start my BMW with my phone?

Download the App Download the BMW Connected app for iOS or Android to start connecting your digital accounts with your vehicle.

Does my BMW have a tracking device?

This service is capable of tracking the location of the car via the car computer and GPS system. Most BMW owners who are concerned about theft employ third party tracking options. These devices have many advantages, and disadvantages. Most devices are small, and can be placed virtually anywhere in the vehicle.

How do you get to the hidden menu on a BMW f20?

In general,when you are inside the hidden menu, by pressing the odo reset button once, you scroll through the options. By pressing it for a few seconds you will either enter the menu displayed or go back to the previous menu, depending on which screen you are at.

What is BMW on board computer?

Your BMW provides you with various On-board Computer (OBC) information, together with statistics for each journey. This data can be viewed from both the instrument panel (dashboard) using the steering stalk and central screen via the iDrive.

How do I exit BMW hidden menu?

7)*To exit service menu, press and hold trip button from main menu. To access the hidden iDrive Settings Menu; 1) From main menu screen, press and hold iDrive controller for 6 secs. 2) Turn 3 clicks clockwise, then 3 clicks anticlockwise.

What happens when you turn off DTC?

With the DTC turned ON, the computer will not allow the tires to spin. Turn off the DTC by pressing the button (the dash will display DTC OFF) and you will be able to get out of the stuck position. Also DTC OFF is the only way to get a good burn out…