Quick Answer: Should You Vacuum Pool Before Shocking?

What’s the difference between pool shock and chlorine?

Chlorine is a sanitizer, and (unless you use Baquacil products) is necessary for maintaining a clear and healthy pool.

Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly..

Can too much shock make a pool cloudy?

Sometimes you’ll get cloudy pool water after shocking. This is common and should dissipate over time. Just keep your filter running and it should clear up. Also, look into a new brand of shock (make sure you buy shock that has a main active ingredient of calcium hypochlorite).

How long does pool shock take to work?

Follow package instructions, which will guide you in how long to wait after shocking before swimming. Heavy shocking with granular chlorine will generally require 24-48 hours before the chlorine level has dropped to safe swimming levels (below 5 ppm).

What makes pool water crystal clear?

Maintain Chemical Levels Maintaining proper chemical levels in your pool is the most important step in keeping the water crystal clear. The key levels to monitor are the chlorine and pH. Chlorine is used to kill germs and bacteria in pool water, so it plays an important role in keeping the water clear.

Why did my pool turn green after I shocked it?

Copper can be the cause of a green swimming pool. … Swimming pool owners may find their pool water turns green after they shock it. When swimming pool water turns green after being shocked, it is generally because there are metal particles in the water.

Can you shock a pool while vacuuming?

Although vacuuming should be combined with pool shocking, it’s better to vacuum the pool before you shock the water. A good scrubbing and vacuuming of the pool walls and floor will ensure that dirt and debris that can affect the water chemistry is removed before the chlorine is added.

Does pool shock kill algae?

Large amounts of algae may require you to add up to three doses of shock over a 36-hour period. When using large amounts of shock to kill algae, water may become cloudy. This should not be a problem, and the water should clear up after running the filter. Wait until the chlorine ppm has fallen below 5.0.

What happens if you put too much shock in your pool?

Although, if you overdo the shock treatment, you risk getting green hair from chlorine due to the excess chlorine oxidizing the copper in the water. You can execute a shock treatment with a few different types of pool shock, just be mindful of how much you’re using.

Can you backwash a pool too much?

Backwashing a filter too frequently will keep the sand so free of dirt buildup that it will not have the ability to remove the smaller particles of dirt and they will simply pass through sometimes causing cloudiness in water.

Can I shock my pool two days in a row?

Will the children swim again? Here’s the deal. It’s pretty tough to over-shock your pool; shocking your pool two days in a row with the proper dosage for your pool volume shouldn’t be a problem – and in fact, is sometimes even needed to rid your pool of algae and other contaminants.

Should you run filter when shocking pool?

Run the filtration system While shocking your pool will help kill any germs any algae, it won’t actually get rid of them; for that, you need your filter. So be sure to run your pool filter for at least 24 hours.

Should you pre dissolve pool shock?

When adding to the water, you must first pre-dissolve each pound in a 5 gallon bucket of water to prevent bleaching. This type of shock is slow dissolving, so it will not completely dissolve before it hits the bottom of the your pool. Once added, you will need to wait 8 hours before swimming.

How often should a pool be shocked?

It’s often recommended to shock your pool once a week. If you don’t do it every week, you should at least do it every other week. This is necessary to maintain your pool’s water chemistry. If you have a lot of people over in your pool or have a party, you may want to shock your pool more frequently.

Do you vacuum a pool on backwash or waste?

You can vacuum a pool on backwash, in theory at least, but it would have no benefit. The water would be pumped backwards through the filter, trapping much of the dirt, before passing out through the backwash hose. This dirt would then end up back in the pool once the pump was back on the filter setting.